For info on following calibration instruments: Helio-Com, SIP Genevoise, Trimos, Mahr 828, Zeiss ULM, OKM, Microrep, Steynmeier, Feinmess Suhl, please contact Luca Bochese at +39.3484121280.

If you're looking for metrology-related info please visit www.feanor.com
If you're looking for research activity please visit
www.feanor.com/research.htm


Gauge database DABAQ4W (command shell). Gauge management


LEHRM4W for calibration of plain rings, plug gages and snap gages according to following standards:

- DIN ISO 286 - 1
- DIN ISO 286 - 2
- British standard BS 969
- ANSI/ASME B89.1.6M - 1984
- Norme Française NF E 02-202 (GE40-001N)
- Master Rings BS 4064:1966 and BS 4065:1966
- Master Rings Norme Française NF E 11-011

Version 32:

DIN-ISO 286-1
DIN-ISO 286-2
French Standard NF E 02-202 (GE40-001N)
Master rings, BS 4064 : 1966
Master rings BS 4065 : 1966
Master rings, French Standard NF E 11-011
ISO 286-2 (js2)
DIN ISO 286 (DIN 7150:2007)
DIN 2250-1 : October 2008
BS 969:2008
ANSI/ASME B89.1.6M - 1984
BS 4064 (Metric) : 1966
BS 4065 (Inch) : 1966
NF E 02-202 (GE40-001N)
NF E 11-011
VW 190206
VW 193260


GEWIND4W for calibration of thread gages and rings according to following standards.

- ISO Metric threads ISO DIN ISO 1502 (DIN 13)
- ISO Metric threads ANSI B.1.16M
- Trapezoidal ISO metric threads DIN 103
- Unified threads and thread gages ANSI ASME B1.1 and B 1.2
- Thread Gauges for Unified threads BS 919
- Gauges for pipe threads DIN ISO 228
- Steel conduit threads DIN 40430, DIN 40431
- Knuckle threads (Rundgewinde) - DIN 405
- Buttress threads and gauges (Sägegewinde), DIN 513 and factory standard
- Gauges for wire thread inserts for metric threads, DIN 8140
- Gages for threads Whitworth BS 84 / BS 919 part 2
- NPSM pipe threads, ANSI/ASME 1.20.1
- Aerospace MJ Threads, DIN ISO 5855
- Gauges for Metric and Unified threads Böllhof factory standard
- Threads for valves and tyres DIN 7756 and ETRTO V.7
- Metric threads NF E 03-152/163 (GE40-010N)
- Unified threads CNOMO GE40-008N (PSA, Renault)
- ACME threads ANSI B1.5 - 1988
- Stub-ACME threads ANSI B1.8 - 1988
- Buttress threads 7°/45°, ANSI B1.9 - 1973
- Hot-dip galvanized threads DIN ISO 965:2002

Version 32:

ISO Metric threads, DIN ISO 1502 (DIN 13)
ISO Metric threads, ANSI B1.16M
Metric ISO Trapezoidal threads, DIN 103
Unified threads and thread gauges, ANSI/ASME B1.1 u. B1.2
Thread gauges for Unified threads, BS 919 (Part 1)
Gauges for pipe threads, DIN ISO 228
Steel conduit threads, DIN 40430, 40431
Knuckle threads, DIN 405
Buttress threads and gauges, DIN 513 /Factory standard
Gauges for wire thread inserts for metric threads, DIN 8140
Gauges for screw threads of Whitworth form, British standard BS 84 / BS 919 (Part 2)
NPSM pipe threads, ANSI/ASME 1.20.1
Aerospace MJ threads, DIN ISO 5855
Gauges for Metric and Unified thread inserts, Boelhoff factory standard
Threads for valves and tyres, DIN 7756 and ETRTO V.7
Metric threads, NF E 03-152/153 (GE40-010N)
Unified threads, CNOMO GE40-008N (PSA, Renault)
ACME threads, ANSI B1.5 - 1988
Stub-ACME threads, ANSI B1.8 - 1988
Buttress threads 7°45° ANSI B1.9 - 1973
Hot-dip galvanized threads, DIN ISO 965:2002


MESSF4W for calibration of dial gauges, precision dial gauges and test dial indicators according to following standards.

- Dial gauges DIN 878 - 1973
- Precision dial gauges DIN 879 - 1999
- Dial test indicators DIN 2270 - 1985
- Precision dial gauges ASME/ANSI B89.1.10M - 1987
- Dial gauges Norme française NF E 011-50
- Dial test indicators Norme française XP E 11-053 : 2000
- Dial gauges Japanese industrial standard JIS B 7503 - 1992
- Dial gauges British standard BS 907-1965
- Dial test indicators British standard BS 2795-1981
- Dial gauges and test dial indicators, Australian standard AS 2103
- Dial gauges (0.01 mm) (Korean standard) KS B 5206-1984
- Dial gauges (0.001 mm) (Korean standard) KS B 5207-1984
- Test dial indicators (Korean standard) KS B 5238-1976

Version 32:

Dial gauges, DIN 878 - 1983
Dial indicators, DIN 879 - 1999
Dial test indicators, DIN 2270 - 1985
Dial gauges, ASME/ANSI B89.1.10M
Dial gauges, French Standard NF E 011-50
Dial test indicators, French Standard XP E 11-053 : 2000
Dial gauges, Japanese Standard JIS B 7503-1992
Dial gauges, British Standard BS 907-1965
Dial test indicators, British Standard BS 2795-1981
Dial gauges and Test indicators, Australian Standard AS 2103
Dial gauges (0.01 mm Graduation), Korean Standard KS B 5206-1984
Dial gauges (0.001 mm Grad.), Korean Standard KS B 5207-1984
Dial test indicators, Korean Standard KS B 5238-1976


MESCHR4W for the calibration of outside and inside micrometers, micrometer heads according to following standards.

- Micrometers DIN 863 - 1999 (part 1-4 )
- Outside micrometers (British standard) BS 870-1950
- Inside micrometers (British standard) BS 959-1950
- Depth micrometers (British standard) BS 6468-1984
- Micrometer heads (British standard) BS 1734-1951
- Micrometers (any type) Federal Specification (USA) GGG-C105 C-1987
- External micrometers, Australian standard AS 2102
- Internal micrometers, Australian standard AS 2101 : 1978

Version 32:

Micrometers (any type), DIN 863 -1999 (Part 1-4)
External micrometers, British Standard BS 870-2008 (has been updated)
Internal micrometers, British Standard BS 959-2008 (has been updated)
Depth micrometers, British Standard BS 6468-2008 (has been updated)
Micrometer heads, British Standard BS 1734 : 1951
Micrometers (any type), Federal Specification (USA) GGG-C105 C-1987
External micrometers, Australian Standard AS 2102
Internal micrometers, Australian Standard AS 2101 : 1978


MESCHI4W for calibration of vernier calipers, depth gauges according to following standards.

- Vernier calipers DIN 862 - 1988
- Vernier calipers (metric) Australian standard AS 1984 - 1977
- Vernier calipers British standard BS 887
- Vernier calipers (metric) Norme Française NF E 11-091

Version 32:


MESZTA4W for calibration of measuring tapes according to following standards.

- Steel tapes DIN 865 and DIN 866
- Steel tapes (British standard) BS 4372


TAPER for calibration of taper thread gauges according to following standards.

Version 32:

Pipe threads for tubes and fittings BS21:1985
Pipe threads ANSI/ASME B1.20.1-1983 (NPT)
Pipe threads ISO 7/2 - 1982(E)
Pipe threads ISO 7/2:2000 (EN 10226:2005)
Pipe threads DIN 2999
Whitworth pipe threads DIN 3858/Factory standard
Pipe threads DIN 158
Gas valve threads DIN 477
Dryseal pipe threads ASME B1.20.5
Taper pipe threads JIS B 0253 -1985
ISO metric threads DIN ISO 965:1998
Trapezoidical threads DIN 103:1997
Thread tapes according to DIN 802
Unified threads ANSI/ASME B1.1-1989(R2001)/B1.2
Unified threads ANSI/ASME B1.1-2003 / ASME B1.2
UNJ Aerospace threads ISO 3161:1999 (ASME B1.15)
Pipe threads according to ISO 228:2000
Steel conduit threads DIN 40431:1972
Whitworth threads acc.BS 84:2007, BS 919-2:2007
Pipe threads according to DIN 259 (old)
Metrical HELICOIL threads BOELLHOFF standard
Knuckle threads according to DIN 405:1997
Unified threads ANSI B1.1-1989/BS 919-1:2007
Unified threads ANSI B1.1-2003/BS 919-1:2007
Buttress threads DIN 513/Factory standard
MJ threads DIN ISO 5855 : 2009
Bolt (external) screw thread for transition fits tol. zone (DIN 13, part 51)
Unified HELICOIL threads Boellhoff standard
Unified HELICOIL threads MS 33537-1994
NPSM Cyl.pipe threads ANSI/ASME B1.20.1-1983 (2001)
NPSF Cyl. Dryseal Pipe Threads ANSI B1.20.3-1976
Threads for valves DIN 7756 - February 1979
Threads for valves ETRTO V.7 - 1999
Gages for ISO metric threads ANSI B1.16-M
Gages for ISO metric threads BS919-3:2007
Metric M screw threads NF E 03-152/153
Unified threads French standard CNOMO GE40-008N
ACME screw threads ASME/ANSI B1.5-1997
Stub ACME screw threads ASME/ANSI B1.8-1988
Buttress Threads 7 deg. 45 deg. ANSI B1.9-1973
Metric thread inserts DIN 8140:1999
Galvanized threads DIN ISO 965 (Parts 4,5):2002
Thread setting gauges DIN 2241
Threads for bicycles DIN 79012:1960
Thread gauges according to "VW Norm 13003"
Thread gauges according DIN 11 (old standard, still common)
Gas cylinder connections DIN 477 (Part 1)
Thread gauges according Swiss Standard NIHS 60-30
ACME threads with clearance for rail vehicles DIN 263:2000
Buttress threads DIN 20401:1984 / Factory standard
Cycle threads "BSC" BS 811:1950 / BS 919-2:2007


SPLINES for calibration of spline gauges according to following standards.

Version 32:

DIN 5480 (March 2006)
DIN 5480 (September 1974)
DIN 5481:2005-06
DIN 5481 (January 1952)
DIN 5482 (March 1973)
ANSI B92.1-1996
ANSI B92.2M-1980


Feanor
F. R. Faehlmanni 1-3
EE 10125 Tallinn - Estonia

Skype 
Me?!
Tel. Fax +372.6996339

Tel. +39.3484121280 +3902320623976 - Fax +39.02700532664

Back to Homepage